top of page
LOOPDRIVE Remote Controlled Zone Extender Module for Additional 6-LDB Sub-Zones
4E-SW6-LITE has been developed to be used with Loopdrive LDB on the outputs only.

LOOPDRIVE Remote Controlled Zone Extender Module for Additional 6-LDB Sub-Zones

SKU: 4E-SW6 LITE

    • DIN-RAIL

    • Directly connected to a single/dual output line of the DA-200/ DCA2.500 amplifier. The SW6 Zone Extender & Switching module sub-devides the signal path A & B into 6x additional surveilled speaker-line outputs.

    • All SW6-outputs can be individually addressed and are carrying signal path A or B.

    • Each output can switch to internal 20kHz line surveillance generator (path C). 

    • Each switched output zone requires an EOL-device for line-integrity detection.

    • Max. of 3x SW6 sharing 1x L-Net connection for communication and power purpose. (Without additional 24VDC) The SW6 can be remotely powered incase more than 3x SW6 units need to be linked to a single L-Net line.

    • Max. load: 500W per channel

    • Redundant L-Net link, 2xRJ45

    • Addressable: 0-255 • EN54-16

    • NO loudspeaker-line surveillance

    • NO need for EOL

    • Specially tunned for LOOPDRIVE-LDB loads

    • Specially ttuned for loudspeaker zoning without loudspeaker surveillance

    • EN54-16

Related Products

bottom of page