Multi-Zone Paging Systems

New PageTek 3 Programmable (Usb) Series

These transmitters are designed for voltage or volt-free inputs and can be programmed to send data or text messages direct to pagers.

Each message can be free formed and can support a message for each change of state. Programmable functions allow for adjustable trigger delay times, repeats and interactive states between inputs. Programming is via a PC via USB with optional programming kit.

The transmitters can be 12v, 24v or mains operated. Mains versions have integral power supplies and can be fitted with an optional battery back-up kit (X30022).

Part no. PageTek SCP series – Numeric,
Non-Programmable
Further Information
X30001 Mains powered 4 zone PageTek kit. Comprising of transmitter with aerial and GEO numeric pagerEngineer's Manual
X30002 12VDC 4 zone PageTek kit. Comprising of transmitter with aerial and GEO numeric pagerEngineer's Manual
X30003 Mains powered 4 zone PageTek transmitter only, with aerial
X30004 12VDC 4 zone PageTek transmitter only, with aerial
Part no.PageTek 3 – Alphanumeric, Programmable
(by PC with USB port)
5-Zone
X30005 12VDC programmable 5 zone PageTek 3 transmitter with aerial
X30006 24V programmable 5 zone PageTek 3 transmitter with aerial
X30007 Mains powered programmable 5 zone PageTek 3 transmitter with aerial
10-Zone
X30008 12VDC programmable 10 zone PageTek 3 transmitter with aerial
X30009 24V programmable 10 zone PageTek 3 transmitter with aerial
X30010 Mains powered programmable 10 zone PageTek 3 transmitter with aerial

PageTek Non-Programmable (Scp) Series

The SCPUHF & PSCPEGN paging kits have been our best sellers for several years and have been used in a wide variety of different applications.

Each kit consists of a 4 zone UHF PageTek paging transmitter, numeric pager and 1/4 wave BNC fitting aerial.

The four inputs require volt free contacts which can be normally open or normally closed, with zone four also able to support a 12v voltage trigger. When a zone is triggered the pager will beep or vibrate and display the active zone number.

Part no. Pagers Numeric
X30011 Front display numeric pager, tone/vibrate. Synthesised. With bungee, holster, battery & pager pocket
X30012 Top display numeric pager, tone/vibrate. Synthesised. With back-clip bungee, battery & pager pocket
Part no.Pagers Alphanumeric
X30013 GEO Scroll synthesised, 14 char text pager, tone/vibrate. C/W bungee, holster, batt. & pager pocket
X30014 GEO Scribe, 40 char text pager, tone/vibrate. With bungee, holster, battery & pager pocket
X30015 GEO Zoom, 4 line/8 line text pager, tone/vibrate. With bungee, holster & battery
X30016 GEO Zoom mains powered wall or desk mounting pager with aerial & PSU
Part no.Fixed Receiver (aerials not included)
X30017 As above but with high specification Class 1 receiver module
X30018 As above but with high specification Class 1 receiver module
X30019 12v 10 zone receiver with individual & common zone relays + serial output. Lite version.
Part no.Accessories
X30020 Programming kit for PT series consisting of PC software and USB cable
X30021 Programming kit for RX10 receivers consisting of PC software and serial cable
X30022 Battery back-up kit for mains powered transmitters (includes 0.8Ah battery)
X30023 Replacement quarter-wave aerial

 

This product was posted in Radio Communication Equipment. Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *