Connexions – a complete paging solution

NEW CONNEXIONS CX5 HIGH POWER TRANSMITTER: The same interface options as the standard Connexions unit but with new high output transmitter on board.

The Connexions System

The Connexions system features an advanced paging encoder and transmitter with 8 dry contact inputs, up to three serial ports which can be factory set to support Scope, ESPA444 and TAP protocols. USB, Ethernet and telephone interface options. Other options include VDI expandable dry contact/voltage input module and Connex Page PC paging software.

Internal Protocol Conversion

Enables paging from third party products that do not have paging ability such as intruder, fire and nurse call panels. The Connexions transmitter is normally linked to the panel’s serial printer port, from where the data is captured, processed and converted to paging data before being transmitted to the pagers.

We currently support various third party panels including Galaxy, Advanced, Morley, Gent, Notifier, Kentec etc. with more being added all the time.

Part No.Connexions Transmitters with Aerial
X40001Mains powered Connexions transmitter, two serial inputs. 0.5W output
X40002CX4DC 12VDC powered Connexions transmitter, two serial inputs. 0.5W output
X40003Mains powered Connexions transmitter, two serial inputs. 2W output
X4000412VDC powered Connexions transmitter, two serial ports. 2W output (requires 3A PSU)
Part no.Accessories
X40005Factory programming charge per message, for telephone interface or VDI if required
X400068-way dry contact interface. Includes transmitter configuration software.
X40007Connexions 3 programming pack. For configuring serial ports, dry-contacts and telephone interface
X30022Battery back-up kit for mains powered transmitters (includes 0.8Ah battery)
X40008Ring detector relay (requires dry contact interface)
X40009Power amplifier (requires suitable antenna system)
X50001Standard quarter wave aerial
X50002Lightweight half wave dipole aerial for internal use, with 5 metre feeder (approx)
X50003Lightweight half wave dipole aerial for internal use, with 5 metre feeder (approx), for amplifier
X50004Lightweight half wave dipole aerial, wall mount, approx 5 metre cable, SMA connector for F-Link & LPA
X20013Lightweight half wave dipole aerial, wall mount, approx 5 metre cable, for PageTek Pro transmitter
X50005Half wave folded dipole aerial for external use with wall mounting bracket and 5 metre RG58 cable
X50006Half wave folded dipole aerial for external use with wall mounting bracket and 10 metre RG213 cable
X50007Half wave folded dipole aerial for external use with wall mounting bracket and 15 metre RG213 cable
X50008Half wave folded dipole aerial for external use. Requires feeder & clamp
X50009Pole mount clamp for aerial
X50010Wall mount clamp for aerial
X500115 metre RG58 pre-terminated cable
X500125 metre RG58 pre-terminated cable for amplifier
X5001310 metre RG213 pre-terminated cable
X5001410 metre RG213 pre-terminated cable for amplifier
X5001515 metre RG213 pre-terminated cable
X5001615 metre RG213 pre-terminated cable for amplifier
This product was posted in Radio Fire Alarm Systems. Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *